Card Making Project - Especially for You Silhouette Card
Made by Dianne
A stylish card made using the Kanban Vintage Silhouettes topper.

To make this card you will need:

5mm Kanban Bling Self Adhesive Gems (8 of the clear in total)

Cut out the silhouette card topper from the Kamban sheet.  Colour in the large white areas of the bonnet and the bow with the silver gel pen.

Cut a piece of the silver mirror card to 102.5mm x 130mm and, using double sided tape glue the card topper to the silver mirror card.

Cut a piece of black gloss card to measure 150mm x 125mm and, using double sided tape, position towards the top of the white gloss creased card, leaving an even white border on either side of card., and glue down.

Take your previously prepared “silhouette topper” and using either your foam pads or silicone glue to give your image a bit of depth centre onto black gloss card .
Note: if using silicone glue the glue will need time to set, so you may have to leave it for an hour or so before moving on to the next step.

Take the silver lame ribbon around the inside of the card, securing it in place on the inside of the card with a small piece of double sided tape, and tie in a knot at bottom front of card.

Place one 5mm clear gem in each of the corners of the black gloss card.

Cut a piece of black gloss card to measure 100mm x 30mm and stick the peel off sentiment onto the card. Place one of the clear gems to each of the corners of the sentiment panel.

Using foam pads or silicon glue stick the sentiments panel to front of the card, ensuring that it is positioned centrally underneath the topper.