Card Making Project - Canoe Birthday Card
Made by Madeleine

The wave blade is used for decoration on the bottom of the card - reflecting the white water in the topper.

To make this card you will need:


For the Insert

Cut the pieces of silver mirror card, ice silver card and Stardream Sapphire card to 148mm long.

Using the wave blade or wave scissors cut the ice silver to 55mm wide, the silver mirror card to 50mm wide, and the Stardream sapphire card to 45mm wide.

Glue first the silver mirror card to the ice silver card then the sapphire card to the silver mirror card using photo glue.  Remember to let the glue dry before applying the next layer of card.

Attach the 3 glued layers to the bottom of the A5 creased card using photo glue and leave to dry.

Push out the Canoe card topper from the Extreme Sports sheet.  You may need to use decoupage scissors or a craft knife to snip the retaining pieces.

Using 3D foam tape 2mm thick glue the topper to the A5 creased card.

Using the wave blade or scissors cut out the Birthday Wishes sentiment from the Birthday Sentiments sheet and glue to the card using photo glue.  Leave to dry.

To finish off the card continue the theme through to the insert.  The insert for this card was printed on ice silver paper using a colour of dark blue ink similar to the colour of Stardream sapphire.

The insert was then folded in half and the top bottom and open side timed to insert size using the wave blade.