Card Making Project - Glitter Snowman Card
Made by Madeleine

Christmas is a time when you can go really mad with glitz and glitter.  This card uses glitter paper and a glitter rub on.

To make this card you will need:

Cryogen White card cut and creased to 144mm x 144mm
Piece of Cryogen White Card large enough for the rub on.
You will also need scissors or Precision Snips

Cut a piece of red glitter paper to 144mm x 65mm using colonial edge scissors or the colonial blade on one of the long sides.

Cut a piece of green glitter paper to 144mm x 55mm using colonial edge scissors or the colonial blade on one of the long sides.

Using double-sided tape line up the green glitter paper on to the red glitter paper and glue down.

Apply double-sided tape to the red glitter paper and line the glitter paper up with the spine of the card and glue in place.

Cut out the large snowman from the Rub On sheet and rub the snowman onto a piece of Cryogen white card.
Tip 1: Rub Ons work better on smooth card so smooth bright white, cryogen white, or gold dust card all work well with rub ons because of their exceptional smoothness.
Tip 2:  If you have a Glitter Ball Tool this is excellent for rubbing the transfer to the card.    When you have finished, peel back the rub on carefully.  If you feel it sticking at any point the design has not all transferred to the card and you should rub again before proceeding with peeling off the rub on sheet.

Cut out the snowman and fix in place using plenty of 3D foam tape.

Cut the word Christmas from the Holographic lace borders and stick in place.

Cut the word merry from the Holographic lace borders and stick in place.